安科瑞医疗IT在彭世洛医院项目的应用_企业新闻_安科瑞电气股份有限公司_低压电器产业网
收藏本页 | 设为主页 | 随便看看
117

安科瑞电气股份有限公司

智能电力监控仪表,智能马达控制器、电量传感器、导轨式安装电表、火灾监控装置、...

供应分类
联系方式
  • 联系人:范曼曼
  • 电话:021-59104832
  • 邮件:2880157853@qq.com
  • 手机:18702112018
  • 传真:021-69158338
站内搜索
 
荣誉资质
友情链接
您当前的位置:首页 » 企业新闻 » 安科瑞医疗IT在彭世洛医院项目的应用
企业新闻
安科瑞医疗IT在彭世洛医院项目的应用
发布时间:2022-01-13        浏览次数:41        返回列表
 摘要:随着电子医疗设备在医院领域的广泛应用,漏电流对病人构成的威胁也越来越大,尤其是那些生命攸关的场所,病人在手术中或麻醉状态下,各种电极、传感器直接插入人体内,微小的漏电流都有可能导致病人触电身亡。另外有些医疗设备用于维持重症病人的生命,一旦设备停电,也会对病人的生命构成威胁。因此,对于医院这一特殊场所的电气设计,应严格按照国家标准和规范要求,采用IT系统供电。本文介绍了医疗IT在彭世洛医院的应用。
Abstract:With the widespread application of electronic medical equipment in hospitals, the threat of leakage current to patients is becoming greater and greater, especially in places where life is critical. The patients are directly exposed to various electrodes and sensors during surgery or anesthesia. Inserted into the human body, even the slight leakage current may cause the patient to be electrocuted. In addition, some medical equipment is used to maintain the lives of critically ill patients. Once the equipment is powered off, it will also threaten the lives of patients. Therefore, for the electrical design of the special place of the hospital, the IT system should be used for power supply in strict accordance with national standards and regulations.This article introduces the application of Medical isolated power supply in Pitsanulok hospital project.
关键字:医疗IT,绝缘监测仪
Keywords:Medical IT,Insulation monitor device
0.项目概述:Project Overview
彭世洛医院位于泰国彭世洛,本次项目主要用于彭世洛医院医疗设备升级.
Pitsanulok hospital project is located in Thailand,the project is mainly used for Pitsanulok hospital medical equipment update .
1.Background
Electric shock and system fault caused by power distribution system are mostly caused by the grounding fault of equipment line. Grounding fault will directly bring the harm of power supply interruption; when the earth fault leakage is serious, it will even burn electrical equipment or lines, causing irreparable loss.
In Medical places, especially those life-threatening class 2 medical places, patients in surgery or anesthesia state, without self-behavior ability, small leakage current can lead to electric shock death of patients. Therefore, the electrical design of this special place should be carried out strictly in accordance with the relevant national standards and specifications.

IT power distribution system (also known as isolated power supply system or ungrounded system) has very small leakage current to ground due to its neutral point ungrounded. When the first insulation fault occurs, the power supply of the equipment will not be affected. So the system can continue to operate. The insulation monitoring device installed in the system can detect the fault in time and send out the corresponding fault warning, prompting the relevant personnel to remove the fault at the appropriate time. For the operation room, intensive care unit and other medical places with high requirements for power supply continuity and safety, local IT system power supply can ensure the security and reliability of power supply for important loads.

2.医疗IT五件套产品介绍Description of five sets of medical IT productsIntroduction
Medical IT system insulation monitoring and fault locating products (five-piece set) include AITR series medical isolation transformer, AIM-M100 medical intelligent insulation monitoring instrument, AKH-0.66P26 current transformer, ACLP10-24 DC power supply, and AID series(AID120/AID150) centralized alarm and display instrument, which are shown in Table 1.
Table 1 Medical IT System Insulation Monitoring Products


3.现场图片 On site Photos

参考文献 Bibliography
1、IT System Insulation Monitoring Device and Fault Location System of Acrel.
2、IEC60354-7-710,Electrical installations of buildings-Part 7-710:Requirements for special installations or locations - Medical locations.
作者简介:
范曼曼,女,本科  安科瑞电气股份有限公司,主要研究方向为智能电网供配电  
QQ:2880157876